EB-PQ2220B 20,000-Lumens 3LCD Large Venue Laser Projector with 4K Crystal Motion

The World's Smallest and Lightest 20,000 lumens 4K projector*

Experience the power and flexibility of the EB-PQ2220B, 20,000-lumen2 large venue laser projector. Featuring a sleek, black cabinet, this premium laser projector is optimised for special application in large venue, immersive experience, 3D mapping and live events.

The EB-PQ2220B uses a 20,000-hour virtually maintenance-free laser light source3. It also features a hermetically sealed optical engine for high dust resistance and a filterless cabinet for low-maintenance operation.

The projector pairs with 11 optional powered lenses (sold separately) to simplify installation and includes a host of premium features for fast setup, such as built-in NFC functionality4, and the optional attachable camera to streamline multi-projector setups.

      • 20,000 lumens of equal white and color brightness2
      • 4K Crystal Motion Technology1
      • Contrast ratio > 5,000,000:1
      • 20,000-hour virtually maintenance-free laser light source3
      • 11 optional powered lenses (sold separately)

       

Incredible Color with 4K Crystal Motion
Epson 3-chip 3LCD technology produces 20,000 lumens of equal white and color brightness2. Epson adopted a double-microlens array technology which places two lenses facing each other for each panel pixel to increase light utilization efficiency and resolution.

High- Performance Image Processing Chip
The operating frequency, memory bandwidth, and data transmission speed have been significantly upgraded to enable a good 4K video experience.

Engineered for reliability and durability
Hermetically sealed optical engine offers high dust resistance while filterless cabinet and upgraded liquid cooling system support easy, low-maintenance operation.

Efficient and Flexible Operation
Equipped by 21:9 support and zero offset lenses for multiple solutions

Epson Projector Config Tool for Easy Set Up
Using NFC wireless communications technology to change projector settings and check equipment information, the Epson Projector Config Tool is an app that allows you to configure network and projection settings, even when the projector is switched off. Allowing management across your fleet of projectors, this tool helps to reduce time and effort required, increasing efficiency.

Projection Technology:


Projection Technology: RGB liquid crystal shutter projection system (3LCD)

Specifications of Main Parts:


LCD: Size: 1.04” wide panel with DMLA (C2 Fine, 12 bit, OD)
Native Resolution : 1080p with 4K Crystal Motion (1920x1080x4)
Resolution On Screen : 4K UHD (3840x2160)
Aspect Ratio: 16:9Light Source: Type: Laser Diode
Life (Normal / Extended): 20,000 hours / 30,000 hoursProjection Lens: Type: Power Zoom, Power Focus
F-Number: 1.8 – 2.3
Focal Length: 36.0– 57.3 mm
Zoom Ratio: 1.0 - 1.61
Throw Ratio: 1.52 – 2.47
Lens Shift:
Vertical: ±58% (Powered)
Horizontal: ±16% (Powered)

Screen Size (Projected Distance):


Zoom : Wide: 60” – 1,000” [1.98 – 34.19 m]Zoom : Tele: 60” – 1,000” [3.24 - 55.28 m]

Brightness:


White Light Output (Normal/Eco): 20,000 lm / 14,000 lmColour Light Output: 20,000 lmLight Output (Center): 21,300 lm

Contrast Ratio:


Contrast Ratio: Over 5,000,000:1

Geometric Correction:


Vertical/Horizontal Keystone: ±45° / ±30° with Middle Throw Zoom LensProjection Orientation: 360º Free

Connectivity:


Network: Wired LAN: RJ45 x 1 (100Mbps)
Optional Wireless: ELPAP11Digital Input: HDMI: 2 (HDCP 2.3)
HDBaseT: 1 (HDCP 2.3)
SDI (SD/HD/3G/12G-SDI): 1 (BNC)Audio Output: Stereo Mini: 1Control I/O: RS-232C: 1 (D-Sub 9pin)
Remote: Stereo Mini x 1Digital Output: HDMI Out: 1 (HDCP2.3)
SDI (SD/HD/3G/12G-SDI): 1 (BNC)USB Input: USB Type A: 2
Port 1: For wireless LAN, SMF1, Firmware update, Copy OSD Setting, 5V/900mA Power supply , Content Playback
Port2 : For ELPEC01, SMF1, Firmware update, Copy OSD Setting, 5V/900mA Power supply , Content Playback
USB Type B: 1 (For Firmware Update, Copy OSD Settings)

Wireless Specifications (Optional Wireless LAN):


Supported Speed for Each Mode **: Infrastructure: IEEE 802.11b (2.4GHz): 11 Mbps , IEEE 802.11g (2.4GHz): 54 Mbps , IEEE 802.11n (2.4GHz): 72.2 Mbps , IEEE 802.11a (5GHz): 54 Mbps , IEEE 802.11n (5GHz): 150 Mbps
Access Point (Wi-Fi Direct): IEEE 802.11g (2.4GHz): 54 Mbps , IEEE 802.11n (2.4GHz): 72.2 Mbps , IEEE 802.11a (5GHz): 54 Mbps , IEEE 802.11n (5GHz): 150 MbpsSupported Mode: Infrastructure, Access Point (Wi-Fi Direct)Supported Security Type: Infrastructure: Open, WPA2 / WPA3-PSK, WPA2 / WPA3-EAP
Supported EAP Type: PEAP, PEAP-TLS, EAP-TLS, EAP-Fast
Access Point (Wi-Fi Direct): WPA2-PSK (AES)

Operating Temperature:


Single Use: Low Altitude (0 - 2,286m/7,500ft): 0 - 50 °C <32 - 122 °F>
High Altitude (Over 2,286m/7,500ft): 0 - 45 °C <32 - 113 °F>
20% - 80% Humidity, No Condensation

Operating Altitude:


Operating Altitude: Over 1,500m/4,921ft with High Altitude Mode: 0 - 3,048m (0 -10,000ft)

Direct Power On / Off:


Direct Power On / Off: Yes

Start-Up Period:


Start-Up Period: Less than 9 seconds (Epson Logo); Warm-up Period: 20 seconds

Quick Start-Up:


Quick Start-Up: Less than 9 seconds (Display)

Cool Down Period:


Cool Down Period: Instant Off

Power Supply Voltage:


Power Supply Voltage: 100 - 240 V AC ±10%, 50/60 Hz

Power Consumption (220 - 240V):


Laser Diode ON (Normal / Extended): 1,431 W / 975 WStand By: 2.0 W / 0.5 W

Weight:


Weight: Approx. 29.2kg

Fan Noise:


Fan Noise (Normal / Eco): 48dB / 39dB

Dimension Excluding Feet:


Dimension Excluding Feet (W x D x H): 586 x 492 x 185 mm

Ghi chú:

1 4K Crystal Motion Technology shifts each pixel to surpass Full HD resolution on screen.

2 Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output measured in accordance with ISO 21118.

3 No required maintenance for the light source for up to 20,000 hours. Approximate time until brightness decreases 50% from first usage. Measured by acceleration test assuming use of 0.04 - 0.20 mg/m3 of particulate matter. Time varies depending on usage conditions and environment. Replacement of parts other than the light source may be required in a shorter period

4 NFC requires use of a device that includes NFC, and may require additional software.

*According to a survey by Epson as of August 2023

**These modes and actual data throughputs depend on supported wireless mode of source devices and/or environmental conditions.

NOTE: External camera module, lens, frame, and mount accessories sold separately.